Removed The Device From The App; Privacy Policy; Cleaning, Maintenance And Storage; Cleaning - Parkside Performance Ppksa 40-Li B2 Originalbetriebsanleitung

GB
MT
Monitoring and controlling the device
1. You r too ls.
2. Select the device from the list.
The device overview page is displayed.
3. Select the desired setting on the over-
view page.
Select Help if you are unsure.
A dialogue box with a description for the
relevant setting is displayed.

Removed the device from the app

When a device is removed from the app, the
associated data is also deleted.
1. You r tool s.
2. ⬅ 䐆 Swipe the device's card from right
to left.
3. Confirm the dialog box.

Privacy policy

see Page More; Section Legal,
policy
Cleaning, maintenance and
storage

Cleaning

WARNING! Electric shock! Never spray
down the device with water.
WARNING! Risk of injury! Always switch
off the motor and let it cool down, then re-
move the batteries before any cleaning work.
Machine part
Chain brake
components
Sprocket (23)
Saw chain (6)
Saw chain (6)
44
Privacy
Action
Visual inspection, re-
place as needed
Visual inspection, re-
place as needed
Check saw chain, oil, reg-
rind or replace if necessary
Clean and oil the saw chain
CAUTION! Cutting injuries! Wear cut-
resistant gloves when working with the saw
chain or with the blade bar.
NOTICE! Risk of damage. Chemical sub-
stances may attack the plastic parts of the
machine. Do not use any cleaning agents or
solvents.
Clean the machine thoroughly. This will ex-
tend the life of the machine and prevent ac-
cidents.
Cleaning after every use
• Keep the handles free of petrol, oil or
grease. If necessary, clean the handles
with a damp cloth washed in soapy water.
• Clean the saw chain. Do not use any li-
quids to clean the saw chain. Lightly oil
the saw chain with chain oil after clean-
ing.
• For cleaning, also remove the sprocket
cover (14) so that this area can also be
cleaned.
• Clean the blade bar (7)
• Clean the ventilation slits and the surface
of the machine with a paintbrush or dry
cloth.
• Clean the oil passage (35) to ensure fault-
free, automatic oiling of the saw chain
during operation. Use a brush or a cloth
to help remove residues from the oil pas-
sage.

Maintenance

Service intervals
Carefully perform the maintenance tasks lis-
ted in the following table on a regular basis.
Regular servicing of your device will extend
its life. Additionally, you will achieve optimum
cutting performance and prevent accidents.
Before
each use
✓
✓
✓
After 10 After
hours each use
of use
✓