Scope Of Delivery/Accessories; Overview; Description Of Functions - Parkside Performance Ppksa 40-Li B2 Originalbetriebsanleitung

GB
MT
must be held with the right hand on the rear
handgrip and the left hand on the front hand-
grip.
Before using the device, the user must read
and understand all information and instruc-
tions in the instruction manual.
Any other use that is not expressly permitted
in this instruction manual may pose a serious
hazard to the user and result in damage to
the device. The operator or user of the ma-
chine is responsible for any accidents or per-
sonal injury and/or material damage to third
parties or their property. The machine is in-
tended to be used by do-it-yourselfers. It
was not designed for heavy commercial use.
The warranty is void in the case of commer-
cial use. The manufacturer is not liable for
damage caused by improper use or incorrect
operation.
The device is part of the X 20 V TEAM
series and can be operated with batteries
of the X 20 V TEAM series. Batteries of the
X 20 V TEAM series may only be charged
using chargers of the X 20 V TEAM series.

Scope of delivery/accessories

Unpack the device and check that
everything is present.
Dispose of the packaging material properly.
• Cordless Chainsaw
• Blade bar (pre-assembled)
• Saw chain (pre-assembled)
• Chain guard
• Oil bottle (180 ml Organic saw chain oil)
• Original instructions
Batteries and charger are not included in
delivery.

Overview

The illustrations for the device
can be found on the front and
back fold-out page.
Fig. A
1 Rear handle
2 On/Off switch
3 Switch lock
4 Front handle
5 Chain brake lever/Front hand protection
6 Saw chain
7 Blade bar
8 Chain catch
30
9 Tank cover (Chain oil)
10 Sight line/Felling direction indicator
11 Oil level indicator
12 Wing nut (Sprocket cover)
13 Chain tensioner screw
14 Sprocket cover
15 Rear hand protection
16 Chain guard
17 Battery
18 Battery release
19 Button (Charge level indicator Battery)
20 Charge level indicator (Battery)
21 Charger
22 Oil bottle
Fig. B
23 Sprocket
24 Lug
25 Blade bar bolt
26 Chain tensioner pin
27 Receptacle (Chain tensioner pin)
Fig. E
28 Battery holder
29 Charge level indicator (Device)
30 Chain speed indicator
31 On/off button
32 Button (Chain speed)
33 "Connected" display
Fig. G
34 Indicator
Fig. H
35 Oil passage

Description of functions

The circulating saw chain is guided over
a blade bar (guide rail). The chainsaw is
equipped with a quick-stop chain brake.
An automatic oil system ensures continu-
ous chain lubrication.The chainsaw is also
equipped with a chain quick-tensioning sys-
tem. The device is provided with various pro-
tective devices to protect the user.
The device can be coupled with the Parkside
App.