Technical Data; Safety Information - Parkside Performance Ppksa 40-Li B2 Originalbetriebsanleitung

Please refer to the descriptions below for in-
formation on how the operating elements
work.

Technical data

Cordless Chainsaw ...........PPKSA 40-Li B2
Engine voltage U ................40 V ⎓ ; (2x 20 V)
Engine current I ...................................... 16 A
Chain speed v ...............15 m/s bzw. 20 m/s
0
Chain speed v ...............................25 m/s
max
Weight (without blade bar, chain, encasing,
oil and batteries) ................................ 3.17 kg
Tank capacity ................................... 180 cm
Blade bar ............. M1431656-1041TL (Trilink)
– Blade bar type .......................................16"
– Blade bar length .............45.5 cm (455 mm)
– Cutting length ....................38 cm (380 mm)
Saw chain ........................CL14356TL (Trilink)
– Chain pitch ........................ 9.525 mm (3/8")
– Chain spacing .................................. 10 mm
– Number of driving elements ....................56
– Drive link thickness ............1.1 mm (0,043")
Chain sprocket pitch ............ 9.525 mm (3/8")
–Number of teeth (chain sprocket) .............. 6
Temperature ................................. max. 50 °C
– Operation .................................. -20 - 50 °C
– Storage ......................................... 0 - 45 °C
Sound pressure level (L
......................................... 90.5 dB; K
Sound power level (L
WA
– Guaranteed ......................................103 dB
– Measured ...............99.8 dB; K
Vibration (a ) ............... 1.76 m/s²; K=1.5 m/s²
h
Type of battery ......................................Li-Ion
PARKSIDE Performance Smart battery
Smart PAPS 204 A1/Smart PAPS 208 A1/
Smart PAPS 2012 A1
– Operating frequency/Frequency band
......................................... 2400 - 2483.5 MHz
– transmitted power ....................... ≤ 20 dBm
Levels of noise and vibration were determ-
ined according to the standards and regula-
tions in the declaration of conformity.
The specified total vibration value and the
stated noise emission value have been
measured according to a standardised test
method and can be used to compare one
power tool with another. The specified total
vibration value and the stated specified noise
3
)
pA
=3 dB
pA
)
= 3.29 dB
WA
emission value can also be used for a provi-
sional assessment of the load.
WARNING! The vibration and noise emis-
sions may deviate from the specified values
during actual use of the power tool, depend-
ing on how the power tool is being used.
Try to keep the exposure to vibrations as
low as possible. An example of a measure
to reduce vibration exposure is limiting the
working hours. All parts of the operating
cycle have to be considered while doing so
(for example, times when the power tool is
switched off and times when it is switched
on but running without any load).
X 20 V TEAM
The device is part of the X 20 V TEAM
series and can be operated with batteries
of the X 20 V TEAM series. Batteries of the
X 20 V TEAM series may only be charged
using chargers of the X 20 V TEAM series.
We recommend that you operate this
appliance with the following batteries
only: PAP 20 A1, PAP 20 A2, PAP 20 A3,
PAP 20 B1, PAP 20 B3, Smart PAPS 204 A1,
Smart PAPS 208 A1, Smart PAPS 2012 A1
We recommend charging these bat-
teries with the following chargers:
PLG 20 A1, PLG 20 A2, PLG 20 A3,
PLG 20 A4, PLG 20 C1, PLG 20 C3,
PDSLG 20 A1, PDSLG 20 B1, PLG 201 A1,
Smart PLGS 2012 A1
Rechargeable battery and charger technical
data: See separate manual.

Safety information

This section deals with the basic safety in-
structions for using the device.
WARNING! Injury and property damage
due to improper handling of battery. Observe
the safety information and notes on charging
and proper use as shown in the instruction
manual for your battery and charger from the
series X 20 V TEAM. A detailed description
of the charging process and further informa-
tion can be found in these separate operat-
ing instructions.
WARNING! A chainsaw is a dangerous
piece of equipment that can cause serious
or even fatal injuries if used incorrectly or
carelessly. Therefore, for your safety and the
safety of others, always observe the follow-
GB
MT
31