Infopool: Further Instructions; Scope Of Delivery For Final Installation Kit; Safety - Maico Rv 2 Montageanleitung

1 Infopool: Further instructions

1 Infopool: Further instructions
These instructions contain important informa-
tion for the specialist installer on final install-
ation of the slide-in module and the internal
cover. For mounting the RV 2 external cover,
see separate instructions.
Final installation takes place after installation of
the RV 2 mounting sleeve and completion of the
plastering and painting work. Please observe the
PushPull safety instructions supplementary
sheet with important information for users
and specialist installers.
Installation instructions for RV 2 pre-
installation kit
Information on installation preparations and in-
stallation of the mounting sleeve during the shell
construction phase.
Installation instructions for RV 2 external
cover
Information on installation of the RV 2 external
cover on the exterior wall.
Quick start guide for RV 2
Brief description of the control elements (ventila-
tion levels, operating modes), symbols and LEDs
of the room air control. Information on changing
the filter.
Operating instructions for RV 2
Information on operation with the room air control,
functional descriptions and information on the
ventilation system settings.
22
Installation/commissioning instructions for RV 2
CDV commissioning software
Information on installing the room air control sys-
tem, sensors, power units, commissioning the
ventilation system, information on commissioning
software and troubleshooting.
Information on the CDV commissioning software:
2 Scope of delivery for final
installation kit
• Complete slide-in module, consisting of 2 fan
units, heat exchanger, terminal box with elec-
tronic circuit board and 4-pin connector plug.
• Complete internal cover set with cover frame,
filter frame, internal air filter ISO coarse 45%
(G3) and external air filter ISO coarse 30%
(G2).
• These installation instructions.
• Supplementary safety instructions for PushPull
ventilation systems.
For information on installing the external
cover and drip rail → Installation instructions
for RV 2 external covers.

3 Safety

Read these instructions and the safety
instructions for PushPull ventilation
units carefully before installation and
use. Follow the instructions. Installation
only permissible when carried out by
trained specialists, electrical connec-
tion only permissible when carried out
by qualified electricians.
Safety instructions for PushPull ventila-
tion units PP 45 / PPB 30 / RV 2 / CPP
60