Hazardous Situations; Assembly; Preparation; Check Delivery Content - Zipper Zi-Rd300 Betriebsanleitung

Liquid fuels can cause serious damage on the skin and the environment.

Vibration:
The declared vibration emission value has been for a standardized test is measured and can
be used to compare one tool with another electric are.
The declared vibration emission value may also be used for a preliminary assessment of ex-
posure.
Warning: Emission level of vibration can be different from the specified value during the ac-
tual use of the electric tool, depending on the manner in which the power tool is used. When
you feel uncomfortable or notice discoloration of skin on your hands during the use of the
machine, stop working immediately. Observe sufficient break times to rest. Failure to have
sufficient break times may result in a hand-arm vibration syndrome.
The extent of exposure depending on the type of work or machine use should be estimated
and appropriate breaks taken. In this way, the extent of exposure can be considerably re-
duced over the entire work time. Minimize the risk caused by vibrations. Maintain this ma-
chine according to the instructions in the manual.
These risk factors can be minimized through obeying all security and operation instructions,
proper machine maintenance, proficient and appropriate operation by persons with tech-
nical knowledge and experience.
In spite of all safety is and remains her healthy common sense and their corresponding tech-
nical qualification / training for use of the machines most important safety factor!
11.4.2

Hazardous situations

Due to the structure and construction of the machine, hazardous situations may occur which are
identified in this manual as follows:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
A safety instruction designed in this way indicates a possibly hazardous situation which,
if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which, if
not avoided, may result in property damage.
Regardless of all safety regulations, your common sense and your appropriate technical apti-
tude/training are and remain the most important safety factor in the error-free operation of the ma-
chine. Safe working depends on you!
12

ASSEMBLY

12.1

Preparation

12.1.1

Check delivery content

Check the delivery immediately for transport damage and missing parts. Report any damage or
missing parts to your dealer or the shipping company immediately. Visible transport damage must
also be noted immediately on the delivery note in accordance with the provisions of the warranty,
otherwise the goods are deemed to have been properly accepted.
12.2

Assemble

The machine comes pre-assembled, it is necessary to assemble the components dismantled for
transport according to the following instructions.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
D A N G E R
W A R N U I G
C A U T I O N
N O T E
A Wheels:
Mount the wheels and fasten them with nuts.
ASSEMBLY
29
ZI-RD300