Welding Characteristic Property And Process Function; Setting The Welding Characteristic Property And Process Functions - Fronius Rc Panel Smart/Tmc Bedienungsanleitung

Welding charac- Depending on the welding machine equipment, the following welding characteris-
teristic property
tic properties and process functions can be set on the RC Panel Smart /TMC
and process (only for MIG/MAG standard synergic welding and MIG/MAG pulse synergic wel-
function ding):
Setting the wel-
ding characteris-
tic property and
process func-
tions
NOTE!
The filler metal, diameter of the wire electrode, and shielding gas can only be
set on the welding machine.
1
2
3
4
5
6
When the welding characteristic property is changed on the welding machine, it
also changes on the RC Panel Smart /TMC (and vice versa).
34
Press the welding characteristic property / process function
Turn the left-hand dial and select the desired welding characteristic property.
Press the left-hand dial to confirm the selection.
Turn the right-hand dial and activate or deactivate the desired process func-
tion.
Press the right-hand dial to confirm the selection.
Press the characteristic / process functions button
button.
to exit the menu.