Deleting An Easyjob - Fronius Rc Panel Smart/Tmc Bedienungsanleitung

A symbolized button is shown at the right edge of the display for a short time,
adjacent to the EasyJob button. The active EasyJob selected is shown in the
middle of the display and by a bar at the right edge of the display.
Deleting an Ea-
1
syJob
After 3 seconds, a symbolized button with a green frame and the Save symbol is
shown on the
ton is overwritten with the current settings.
After holding the button for a further 2 seconds (5 seconds in all), the symboli-
zed button is
The EasyJob has been deleted from the storage space. The storage space is now
empty
To delete an EasyJob, press and hold the corresponding EasyJob button for 5
seconds.
display. The EasyJob previously stored on the EasyJob but-
displayed with a red frame and the Delete symbol.
and available for another EasyJob.
Englisch (US)
41