Settings On The Remote Control; Operating Modes - Fronius Rc Panel Smart/Tmc Bedienungsanleitung

Settings on the remote control

Operating modes

The operating modes you can select differ depending on the welding process.
The following operating modes can be set on the RC Panel Smart/TMC:
For MIG/MAG standard synergic welding, MIG/MAG pulse synergic welding, and
MIG/MAG manual welding:
-
-
-
-
-
2)
For TIG welding with a multiprocess welding machine:
-
-
-
No operating modes can be set for manual metal arc welding and CEL welding.
Welding proces- Depending on the equipment of the welding machine, the following welding pro-
ses cesses can be set on the RC Panel Smart/TMC:
-
-
-
-
-
-
1)
chine.
32
2-step mode
4-step mode
Special 2-step mode
Special 4-step mode
Spot welding
Only for MIG/MAG standard/pulse synergic welding
2-step
4-step
Spot welding
MIG/MAG standard synergic welding
MIG/MAG pulse synergic welding
MIG/MAG standard manual welding
TIG welding
Manual metal arc welding
1)
CEL welding (only for Fortis /XT devices)
Depending on the availability of the Multiprocess function on the welding ma-
2)
2)