General; Safety; Scope Of Supply; Intended Use - Fronius Rc Panel Smart/Tmc Bedienungsanleitung

General

Safety

Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Danger due to welding processes starting unintentionally. Once the remote con-
trol has been connected, the welding process can be started using the welding
torch or the remote control.
Could result in serious personal injury and damage to property.
▶
NOTE!
▶

Scope of supply

Intended use

The RC Panel Smart/TMC remote control is intended exclusively for setting the
specified welding processes in combination with Fronius system components.
Any other use is not in accordance with the intended use. Fronius shall not be li-
able for any resulting damage.
Intended use also means:
-
-
24
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this equip-
ment and all system components.
WARNING!
Ensure that the welding process is only started intentionally.
Keep unauthorized people away during welding, both from the welding ma-
chine and the welding process.
Reading these operating instructions in their entirety
Following all instructions and safety rules in the operating instructions
(1) Remote control incl. TMC* ca-
ble (5 m)
(2) Safety document
Option: TMC cable extension 5 m
(43,0004,5979)
* TMC - TIG Multi Connector