Scheppach HC24x Originalbetriebsanleitung Seite 22

4. Proper use
The compressor is used to generate compressed air for
pneumatically powered tools that can be operated with
an air rate of up to 96 l/min. (e.g. tyre inflaters, air blow
guns, paint spray guns).
Due to the restricted air flow rate, it is only possible
to operate tools with a very high compressed air
consumption (e.g. orbital sanders, straight grinders and
impact screwdriver) in some circumstances.
The compressor may only be operated in a dry and
well ventilated indoor space.
The machine may only be used in the intended manner.
Any use beyond this is improper. The user/operator,
not the manufacturer, is responsible for damages or
injuries of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly
instructions and operating information in the operating
manual. Persons who operate and maintain the
machine must be familiar with it and must be informed
about potential dangers.
In addition, the applicable accident prevention
regulations must be strictly observed. Other general
occupational health and safety-related rules and
regulations must be observed.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the
machine.
The machine may only be operated with original parts
and original accessories from the manufacturer. The
safety, operating and maintenance specifications of the
manufacturer, as well as the dimensions specified in the
technical data, must be observed.
Please note that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the device is
used in commercial or industrial applications, or for
equivalent work.
22 | GB
5. General safety instructions
General safety instructions
ATTENTION! The following basic safety measures
must be observed when using electric tools for
protection against electric shock, and the risk of
injury and fire. Read all these notices before using
the power tool and store the safety instructions well
for later reference.
Maintenance and service
1. Regular
lubrication. Pull out the mains plug before making
any settings, service or repair work.
2. Only have your device repaired by qualified
specialists and only with original spare
parts. This ensures that safety of the device is
maintained.
Safe work
1. Keep the work area orderly
– Disorder in the work area can lead to accidents.
2. Take environmental influences into account
– Do not expose power tools to rain.
– Do not use power tools in a damp or wet
environment. There is a risk of electric shock!
– Make sure that the work area is well-illuminated.
– Do not use power tools where there is a risk of
fire or explosion.
3. Protect yourself from electric shock
– Avoid physical contact with earthed parts (e. g.
pipes, radiators, electric ranges, cooling units).
4. Keep away from children!
– Do not allow other persons to touch the
equipment or cable, keep them away from your
work area.
5. Securely store unused electric tools
– Unused power tools should be stored in a dry,
elevated or closed location out of the reach of
children.
6. Do not overload your electric tool
– They work better and more safely in the specified
output range.
7. Dress properly
– Do not wear wide clothing or jewellery, which can
become entangled in moving parts.
– Rubber gloves and anti-slip footwear are
recommended when working outdoors.
– Tie long hair back in a hair net.
www.scheppach.com
cleaning, maintenance, and