Technical Data; General Description; Electrical Safety; Safety In The Workplace - Royal Catering Rcbm-30In Bedienungsanleitung

U S E R M A N U A L

TECHNICAL DATA

Parameter
description
BEER
Product name MASH
TUN 30L
RCBM-
Model
30IN
Rated voltage
[V~]/Frequency
[Hz]
Rated power [W]
Safety class
Volume [l] 30
Temperature
range
Time range [min]
Dimensions
450x450x690
[mm]
Weight [kg] 10,5

1. GENERAL DESCRIPTION

The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
ATTENTION! Hot surface, risk of burns!
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
Parameter value
BEER BEER
MASH MASH
TUN 40L TUN 60L
RCBM- RCBM-
40IN 60IN
230/50
2500 3000
I
40 60
from 10°C to 100 °C,
increments of 0.1°C
0-180
480x480
x820
11,6 13
technologies and
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms „device" or „product" are used in the warnings
and instructions to refer to BEER MASH TUN. Do not use
in very humid environments or in the direct vicinity of
water tanks. Prevent the device from getting wet. Risk of
electric shock! Do not put your hands or other items inside
the device while it is in use! Do not cover the ventilation
openings!

2.1. ELECTRICAL SAFETY

a) The plug must fit the socket. Do not modify the plug
in any way. Using original plugs and matching sockets
reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an increased
risk of electric shock if the earthed device is exposed
to rain, comes into direct contact with a wet surface
or is operating in a damp environment. Water getting
into the device increases the risk of damage to the
device and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e) If using the device in a damp environment cannot be
avoided, a residual current device (RCD) should be
applied. The use of an RCD reduces the risk of electric
shock.
f) Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
g) To avoid electric shock, do not immerse the cord, plug
or device in water or other liquids. Do not use the
device on wet surfaces.
h) The socket to which the device is connected must be
grounded.
i) Before disconnecting the device's plug from the
power supply, first switch off the device.
j) The electrical socket must be secured with a 16 A fuse.

2.2. SAFETY IN THE WORKPLACE

a) Make sure the workplace is clean and well lit. A
messy or poorly lit workplace may lead to accidents.
Try to think ahead, observe what is going on and use
common sense when working with the device.
b) Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust. The device
generates sparks which may ignite dust or fumes.
c) If you discover damage or irregular operation,
immediately switch the device off and report it to a
supervisor without delay.
d) If there are any doubts as to the correct operation of
the device, contact the manufacturer's support service.
e) Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f) In case of fire, use a powder or carbon dioxide
(CO ) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
EN
9