EN
g)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
h)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
i)
Keep packaging elements and small assembly parts
in a place not available to children.
REMEMBER! When using the device, protect children
and other bystanders.
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which can
significantly impair the ability to operate the device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the device.
c)
When working with the device, use common sense and
stay alert. Temporary loss of concentration while using
the device may lead to serious injuries.
d)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
e)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device in
unexpected situations.
f)
The device is not a toy. Children must be supervised to
ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not be
operated and must be repaired.
b)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces the
risk of accidental activation.
c)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose a
hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of the
device. If damage is discovered, hand over the device
for repair before use.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
g)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
h)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country where
the device will be used.
i)
Do not move, adjust or rotate the device in the course
of work.
10
j)
Do not leave this appliance unattended while it is in
use.
k)
Clean the device regularly to prevent stubborn grime
from accumulating.
l)
The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
m)
Do not run the device when empty.
n)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
o)
Keep the device away from sources of fire and heat.
p)
Do not remove the lid during cooking.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is still
a slight risk of accident or injury when using the device.
Stay alert and use common sense when using the device.
3. SCOPE OF APPLICATION
Home brew mesh tun is designed for preparing mash and
wort. Do not use the device to:
•
cook soups or other drinks;
•
warm or heat flammable, noxious, particularly
volatile, or any other toxic substances.
The user is liable for any damage resulting from non-
intended use of the device!
3.1 THE DEVICE
2
1
9
10
8
1.
Main tank
2.
Tank with sieves
3.
Top sieve
4.
Bottom sieve
5.
Central tube
6.
Overflow tube (curved)
7.
Handle on tank with sieves
8.
Lid
9.
Pump and device ON / OFF buttons
10.
Drain tap
11.
Bottom pipe
12.
long filter
4. BREWING PREPARATION
•
Ensure the device is standing on a safe, stable
horizontal surface.
•
When full, the device holds hot, boiling liquid, and
may weigh up to 70 kg. A stable horizontal position
is required to ensure successful pumping during the
brewing process. Avoid unstable surfaces.
•
Do not move the device during the brewing process. The
handles are only designed to transport an empty device.
•
Always clean all device elements as hygiene is
essential for a successful brewing process.
•
To sterilise the accessories, heat up some hot water
in the boiler before use.
5
3
4
12
7
11
6