Data Logger - Pce Instruments Pce-Dfg 50K Xf Bedienungsanleitung

5.2.3

Data logger

The data logger of the meter enables the recording of all measured values. The time period as
well as the storage interval can be freely configured with the help of this menu. The menu contains
the following items.
Menu item
Start condition
Stop condition
Sampling rate
Records
Delete all
Select the menu item Data logger in the main menu with the ▲/▼ keys and press the OK key.
You can now use the ▲/▼ keys to mark the desired submenu in orange. Confirm your selection
with the OK key.
5.2.3.1 Start condition
In the Start condition menu, you can set the conditions under which the data logger is started.
Start condition
Manual
Date & time
Limit value
5.2.3.1.1 Starting the data logger manually
Use the ▲/▼ keys to select Manual as the start condition for the data logger and confirm the
selection with the OK key. A tick appears next to the selection as confirmation. Manual is the
factory default setting. You can now return to the previous menu by pressing the back key.
Description
Sets the start condition for data logging
Sets the stop condition for data logging
Sets the storage rate. This also corresponds to the sampling rate
in the measurement settings.
Listing of the saved measurement data in the meter
Deletes all saved records
Description
Manual start of the data logger via the data logger dialogue in
the measuring screen
Automatic storage when a start date and time is reached
Automatic storage when a preset limit value is exceeded
© PCE Instruments
12