PCE Instruments PCE-DFG 50K XF Bedienungsanleitung Seite 91

5.2.3.2.4 Duration
To change the value via the input dialogue, navigate to the item Duration with the ▲/▼ keys and
press the OK key. Once the dialogue has opened, use the ▲/▼ keys to change the time value or
the time unit, depending on which one is highlighted in orange. Use the ►/◄ keys to change
between the selection of the time value and the time unit. The value can be set in the range of 0
... 59 seconds, 0 ... 59 minutes or 0 ... 12 hours. To confirm that value, press the OK key again.
Now the setting for the duration is saved. You can now return to the previous menu by pressing
the back key.
5.2.3.3 Sampling rate
Select Sampling rate with the ▲/▼ keys in the Data logger menu to select the desired sampling
rate for the session and press the OK key. The sampling rate value is highlighted in orange. By
pressing the ▲/▼ keys, the value can be changed and to confirm the set value, press the OK key
again. You can now return to the previous menu by pressing the back key. When you are in the
main screen and data is being displayed without datalogging running, the sampling rate is
automatically set to 5 Hz but when a datalogging session is launched, it is automatically switched
to this value.
© PCE Instruments
16