Safety Notes - Pce Instruments Pce-Dfg 50K Xf Bedienungsanleitung

1

Safety notes

Please read this user manual carefully and completely before operating the unit for the first time.
The appliance may only be used by carefully trained personnel. Damage caused by non-
observance of the instructions in the user manual is exempt from any liability.
•
This meter may only be used in the manner described in this instruction manual. If the
meter is used in any other way, dangerous situations may arise.
•
Only use the measuring device if the ambient conditions (temperature, humidity, ...) are
within the limits specified in the specifications. Do not expose the device to extreme
temperatures, direct sunlight, extreme humidity or moisture.
•
Do not subject the unit to shocks or strong vibrations.
•
The device housing may only be opened by qualified personnel of PCE Deutschland
GmbH.
•
Never use the meter with wet hands.
•
No technical modifications may be made to the unit.
•
The unit should only be cleaned with a cloth. Do not use scouring agents or cleaning
agents containing solvents.
•
The device may only be used with the accessories offered by PCE Deutschland GmbH
or equivalent replacements.
•
Check the housing of the meter for visible damage before each use. If there is any
visible damage, the unit must not be used.
•
The measuring device must not be used in an explosive atmosphere.
•
The measuring range given in the specifications must not be exceeded under any
circumstances.
•
Failure to observe the safety instructions may result in damage to the unit and injury to
the operator.
We accept no liability for printing errors and mistakes in the content of these instructions.
We expressly refer to our general warranty conditions, which you will find in our General Terms
and Conditions.
© PCE Instruments
42