Display Modes - Pce Instruments Pce-Dfg 50K Xf Bedienungsanleitung

3.5 Display
3.5.1

Display modes

The ▲/▼ keys are used to switch between the individual display modes. Depending on the
display mode, the position of the page is marked on the vertical scroll bar. If you are on the top
level and press the ▲ key, you will reach the lowest level. If you are on the lowest level and press
the ▼ key, you will reach the top level.
Display
Level
type
Numerical
1
display
Statistical
2
display
Graphical
3
display
Description
Numerical display of the current measured value. Above the
numerical value, a slider is displayed which shows the measured
value as a deflection depending on the measuring direction.
In this display, statistical measured values are shown in the selected
unit in addition to the numerical value. The maximum, minimum and
average measured values of the current measurement are
displayed.
In addition to the numerical view, a graph of the current
measurement is displayed. The graph always shows the last 15
seconds of the ongoing measurement.
© PCE Instruments
47