PCE Instruments PCE-DFG 50K XF Bedienungsanleitung Seite 106

5.2.5 Calibration
To open the Calibration menu, press the MENU key in the measurement screen, then use the ▲
or ▼ key to navigate to the Calibration menu item and confirm your selection with the OK key.
Note:
If your force gauge needs calibration or adjustment, please contact PCE Instruments. You will
find the contact details at the end of this manual.
5.2.5.1 Calibration information
By selecting the menu item Calibration information, the date of the last calibration is shown.
This menu item is purely an information display without any input options. The menu shows the
last calibration date, the next calibration date, if the factory calibration has been carried out and
the calibration number to give you some control over the calibrations.
To view the calibration information, navigate to the Calibration information menu item using the
▲ or ▼ key and confirm the selection with the OK key.
© PCE Instruments
31