PCE Instruments PCE-DFG 50K XF Bedienungsanleitung Seite 107

5.2.5.2 Calibration reminder
In this menu, a reminder for a pending calibration can be set. The calibration reminder appears
as a pop-up dialogue when the meter is switched on until the meter has been calibrated again by
the PCE Instruments laboratory. To set the calibration reminder, navigate to the Calibration
reminder menu item using the ▲ or ▼ key and confirm the selection with the OK key. A submenu
now opens in which the settings are to be made as follows.
5.2.5.2.1 Reminder
To enable or disable the reminder, the tick next to the word "Reminder" can be set or removed
using the OK key. Navigate to the Reminder item using the ▲ or ▼ key and activate or deactivate
Reminder with the OK key.
© PCE Instruments
32