PCE Instruments PCE-DFG 50K XF Bedienungsanleitung Seite 78

Calibration
parameters for
customers
(code 1703)
Manual
Info
Characteristics Mode
Calibration points
Table
Gravity value
High resolution
Calibration mode
Clear all the memory
Reset
Sensitivity (mV/V) Maximum load units
Maximum load
Sensitivity
Zero offset
Gravity value
High resolution
Reset to factory loadcell
© PCE Instruments
New: creates
Edit: modifies the current calibration table
Number of calibration points for the table
Table of points for the calibration
Gravity value in m/s
On
Off
Enables adding another decimal place to the
measurement
Lets the technician select the calibration mode used
for the measurements between "Curves" mode and
"Sensitivity" mode
Clears the memory, even the stored calibration
Resets the calibration
Unit selected for the maximum load and the
calibration curves
Typical maximum load the gauge can support in
newton
Sensitivity of the gauge in mV/V
Setting the zero offset
Gravity value in m/s
On
Off
Enables adding another decimal place to the
measurement
Restores the first calibration stored in the device
Displays a QR code with the manual of the device
Displays the name, the serial number and the
firmware version of the device along with the
website
3
a new calibration table
2
used for the calibration
2
used for the calibration