PCE Instruments PCE-DFG 50K XF Bedienungsanleitung Seite 89

5.2.3.1.3 Starting the data logger when the limit value is exceeded
To change the value via the input dialogue, use the ▲/▼ keys to navigate to the item Limit value
and press the OK key. To change the value, use the ► key to select the digit to be adjusted. The
digit to be changed is highlighted in orange. Use the ▲/▼ keys to change the selected digit within
the range 0 ... 9. To confirm the value set as the limit value, press the OK key again. Now the
setting for the limit value is saved and the limit value is displayed in orange. You can now return
to the previous menu by pressing the back key.
Note:
Ensure correct selection of Measuring direction for tensile and compression tests.
5.2.3.2 Stop condition
Three different options are available for stopping the data logger. Either the stop can be done
manually via the data logger dialogue by pressing a key, on a date and time, below a limit or after
an adjustable time interval.
Stop condition
Manual
Date and time
Limit value
Duration
5.2.3.2.1 Stopping the data logger manually
Select Manual with the ▲/▼ keys to select manual as the stop condition for the data logger and
confirm the selection with the OK key. A tick appears next to the selection as confirmation. Manual
is the factory default setting. You can now return to the previous menu by pressing the back key.
Description
Stopping the data logger manually via the data logger dialogue in the
measuring screen
Automatic termination when a stop date and time is reached
Data logger is stopped when the value falls below the limit value
Stop of the data logger after a defined amount of time recording
© PCE Instruments
14