PCE Instruments PCE-DFG 50K XF Bedienungsanleitung Seite 113

5.2.5.3.4 Reset to factory load cell
If you want to use a different load cell than the one that comes whit the device, the calibration for
that should be configured by the calibration department of PCE Instruments. Once you want to
go back to the original load cell, you can select this item to restore its calibration without the need
of sending the device back to the calibration department. Once the item is selected, a popup
asking for confirmation will appear.
5.2.6 Manual
A QR code is displayed in this menu. The QR code can be scanned with an appropriate reader
such as a mobile phone and leads directly to these operating instructions.
When you are in the main menu, use the ▲ or ▼ key to navigate to the Manual item. If you now
press the OK key, a QR code is shown on the display. Scan this code with your smartphone and
your smartphone browser will open the detailed operating instructions as a PDF. Press the back
key to return to the main menu.
© PCE Instruments
38