PCE Instruments PCE-DFG 50K XF Bedienungsanleitung Seite 88

5.2.3.1.2 Start by date and time
Select the Date & time item with the ▲/▼ keys and confirm the selection with the OK key to set
a start date and time via the input dialogue.
An input dialogue will now open where you must first set the date. To change the date, use the
► key to select the digit to be changed. The digit to be changed is highlighted in orange. With the
▲/▼ keys, you can now select the day within the range 01 ... 31 (depending on the month), the
month within the range 01 ... 12 and the year within the range 2023 ... 2060. To confirm the set
value, press the OK key again.
The start time is then set. A new dialogue window opens automatically. To change the time, use
the ► key to select the digit to be changed. The digit to be changed is highlighted in orange. The
▲/▼ keys can now be used to change the hours within the range 00 ... 24 (depending on the
time format) and the minutes within the range 00 ... 59. To confirm the set value, press the OK
key again.
The setting is accepted and an orange tick appears next to "Date & time". You can now return to
the previous menu by pressing the back key.
Note:
At least the stop time must be in the future. Otherwise, the meter will give an error message.
© PCE Instruments
13