PCE Instruments PCE-DFG 50K XF Bedienungsanleitung Seite 86

Zero's threshold
5.2.2.5
The adjustable threshold value is the measured value up to which the force gauge displays 0 until
the actual measured value is to be shown on the display.
To change the value via the input dialogue, navigate to the Zero's threshold item using the ▲/▼
keys and press the OK key. Use the ► key to select the digit to be adjusted. The digit to be
changed is highlighted in orange. Use the ▲/▼ keys to change the selected digit within the range
0 ... 9. To confirm the set value, press the OK key again. You can now return to the Measurement
menu by pressing the back key.
5.2.2.6 Measuring direction
The measuring direction indicates whether the measured value for tensile tests or for compression
tests is to be displayed as a positive value on the measuring screen.
To change the measuring direction between tension and compression, select the menu item
Measuring direction with the ▲/▼ keys and press the OK key. You can now use the ▲/▼ keys
to switch between the word Ten. (tension) and Com. (compression) marked in orange. Confirm
the selection with the OK key. You can now return to the previous menu by pressing the back
key.
© PCE Instruments
11