PCE Instruments PCE-DFG 50K XF Bedienungsanleitung Seite 80

The following options can be set in this submenu:
Menu item
Units
Surface
Alarm
Gravity value
Zero's threshold
Measuring direction
5.2.2.1 Unit
In the Unit menu, the force and surface units can be set.
The following units are available for the measurement:
Measured variable
Force
Weight
3
Pressure
4
Torque
In the Measurement submenu, select the Unit menu item. Here, select Measurement units and
use the ▲ or ▼ key to select the desired unit and press OK to confirm it.
In the Surface units menu item, you can select the unit for the surface value that has to be entered
in order to calculate the pressure. You can select the unit m
3
Only available with the force surface set
4
Only available if a torque sensor has been connected
Description
Units for force, weight, pressure and torque are adjustable.
To measure the pressure in Pa, the area can be set here.
The configuration for the visual and acoustic alarm of the meter is
carried out in the Alarm menu.
Relevant gravitational value at the measuring point in m/s²
The adjustable threshold value is the measured value up to which the
force gauge displays 0 until the actual measured value is to be shown
on the display.
Specifies whether a positive measured value should be displayed for
tensile tests or for compression tests.
Unit
Newton, kilonewton
Gramme, kilogramme, ton
Pound
Kilopascal
Newton centimetre,
pound feet
© PCE Instruments
5
Abbreviation
N, kN
g, kg, t
lb
kPA
newton metre,
Ncm, Nm, lb ft
2 2 2
, cm or ft .