Werbung
EN
1
Make sure the clean water tank is empty.
Unscrew the clean water outlet
1
When finished using the machine it is good practise to empty and clean the tanks of the machine.
To do this firstly remove the tank assembly from the machine (see set up),
1. Remove the clean water tank from the main tank body and empty.
2. Remove the separator from the tank.
3. Pick up the tank, use the front handle and base as handles, tip the contents into a suitable drain, rinse the tanks and repeat the
emptying process. Refit the clean water tank and separator and place back onto the machine.
!
NOTE: IF THE MACHINE IS TO BE LEFT FOR LONG PERIODS BETWEEN USE,
Regular Maintenance
2
Remove the clean water outlet from the
clean water tank.
2
ENSURE THE CLEAN WATER TANK IS EMPTIED.
3
Wash the clean water outlet thoroughly
under a tap, make sure the filter is clean
with no blockages. Check for any damage
(if any damage is found replace the clean
water outlet).
3
43
43
Clean water tank outlets
Emptying tanks
!
Werbung
