Werbung
EN
Clean water tank removal and filling
1
After lifting onto a suitable work surface,
turn tank assembly
4
To fill remove the rubber stop from the filling neck. Note: There is a T piece keeping the rubber stop from being completely removed.
Pour in the chemical (follow chemical manufactures dilution rates). Only fill the tank to the MAX fill line with clean water using a tap,
hose or suitable water container. DO NOT OVER FILL.
7
Place the tank back into the main tank body and turn lock to hold in place.
Make sure it is securely fitted before fitting the tank assembly back on the machine.
Quick Set-up Guide
2
Turn clean water tank lock to release
clean water tank.
5
8
21
21
3
Remove the clean water tank from the
tank assembly.
6
9
Werbung
