Werbung
EN
Battery fitting and water flow settings
1
4
6
Quick Set-up Guide
A
2
B
5
7
25
25
3
While holding down the battery
compartment latch (A), tip battery
compartment forward.
Lift the battery using the battery handle.
Place the battery into the battery
compartment ensuring it is securely
in place and the orientation is correct
(battery handle folds down towards the
machine handle (B)).
Tip battery compartment back into place
until latch clips closed.
Located on the right side of the machine
is the water flow control tap.
Push the fluid control lever to set the
desired flow required, this will vary
depending on what brush / pad and floor
type the machine is being used on.
Note: On first use open the water tap fully
and run the machine for a short period to
purge the water flow then adjust tap to
desired flow.
B
Werbung
