Kessel EasyClean ground Multi NS 4 Einbau- Und Betriebsanleitung Seite 46

Clean the inside walls of the tank (as far as required)
while pumping off
At the same time as the pumping out process, clean the
inside walls of the tank with a water hose.
Once the tank has been pumped empty (slurping
noises) , end the pumping off process by the disposal
vehicle.
Disconnect the suction hose of the disposal vehicle from
the Storz B coupling.
Filling with cold water
Start cold water supply.
Wait until the water level has reached the calm water
level , and then turn off cold water supply.
Re-close the service access.
Record the disposal in the log book.
Disposal procedure is completed.
46 / 84 Installation and operating instructions 016-302E