Grease is defined as substances of vegetable origin and/or animal origin with a density of less than 0.95 g/cm
tially or completely insoluble in water or saponifiable. Disposal and maintenance cycles must be complied with for correct
operation.
The separators are only intended for installation in the ground outdoors under defined conditions, see "Assembly" chapter.
All water-carrying components of the product must be installed at frost-free depth (differs depending on region). Installation
in areas of high-water table is ensured due to the groundwater resistance of the system.
WARNING
The pump tank of the separator may be accessed for installation or maintenance purposes.
On accessing, all safety measures for entering chambers must be taken (including testing the air to ensure that it is
safe and forced (mechanical) ventilation of the tank if necessary, safety harnesses and look-out personnel, and tri-
pod).
The pumping station conforms to DIN EN 12056. The installation requirements of the standard must be observed.
The pumping station is solely suitable for faecal-free wastewater. The pressure pipe should be routed via a proper backwater
loop were required.
The stability of the tank is only ensured for its self-weight, transport and the described installation, in accordance with the
intended use (e.g. load class, road construction). Additional loads from single or strip footings or other external impacts must
be avoided. Special measures may have to be taken if these are to be expected.
Any of the following actions that are not expressly authorised in writing by the manufacturer can invalidate the war-
ranty:
Modifications or attachments
Use of non-genuine spare parts
Repairs carried out by companies or persons not authorised by the manufacturer
32 / 84
Installation and operating instructions
, that are par-
3
016-302E