Kessel EasyClean ground Multi NS 4 Einbau- Und Betriebsanleitung Seite 45

Cleaning the inside walls of the tank (if required)
At the same time as the pumping out process, clean the
inside walls of the tank with a water hose.
Once the tank has been pumped empty (slurping
noises) , end the pumping off process by the disposal
vehicle.
Wait briefly, then remove the suction hose.
Filling with cold water
Start cold water supply.
Wait until the water level has reached the calm water
level , and then turn off cold water supply.
Re-insert the cover plate.
Record the disposal in the log book.
Disposal procedure is completed.
7.4 Carry out the disposal (direct)
Open the service access cover during pumping off.
Connect the suction hose of the disposal vehicle to the
Storz-B coupling.
Start the pumping process at the disposal vehicle.
Wait until 1/3 of the calm water level has been pumped
away. The period of time this takes depends on the nomi-
nal size.
016-302E Installation and operating instructions 45 / 84