Herunterladen Inhalt Inhalt Diese Seite drucken

Introduction; Intended Use; Product Description - Reely PC9 ARF Montageanleitung

Bausatz
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen



1. Introduction

Dear Customer,
Thank you for purchasing this product.
This product meets the requirements of current statutory, European and national guidelines.
These operating instructions are part of this product. They contain important information on how to put the product into operation and
how to handle it. Please take this into consideration when you pass the product on to third parties.
Please keep these instructions for further reference!
All company names and product designations contained herein are trademarks of the respective owners. All rights reserved.
In case of any technical inquiries, contact or consult:
Tel. no.:
+49 9604 / 40 88 80
Fax. no.: +49 9604 / 40 88 48
E-mail:
tkb@conrad.de
Mon. to Thur. 8.00am to 4.30pm
Fri. 8.00am to 2.00pm


2. Intended use

This product is an electrically driven model plane. It is controlled wirelessly using a remote control which has to be purchased separately. The model is designed
for outdoor use and should only be operated in soft wind conditions or windless conditions.
The product must not get damp or wet.
The product is not a toy. It is not suitable for children under 14 years of age.
Observe all safety instructions in these operating instructions. They contain important information regarding the handling of the product.
You are solely responsible for the safe operation of the model!


3. Product description

The flying model "PC-9" is an aerobatic model plane which is only intended for experienced model plane pilots. Broad knowledge in the handling of model
airplanes is absolutely required to assemble and operate this model.
This extremely manoeuvrable model is not suitable for beginners!
The fuselage halves, the wings and the units are made of precisely fitting foamed plastic parts manufactured in special moulds.
In addition to the already mentioned main components, a spinner with airscrew, all the parts required for the rudder linkage, a brushless motor with speed
controller and three micro servos are included in delivery.
A multi-colour decal set is also enclosed for decoration purposes.
The user can control: aileron, elevator and rudder as well as the speed of the electric motor.
24

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis