Aventa compact 2.G / Aventa compact plus 2.G
Fig. 13
The clearance around the external unit must be
20 mm at the front and 100 mm at the side. At least
30 mm of clearance must be left at the rear. Truma
recommends clearance of 200 mm so that the exhaust
air can blow out freely.
Fig. 14
The clearance around the air distributor must allow
the air to blow out freely. The side clearance must be
at least 40 mm. The pivoting range of flaps and doors
must be taken into consideration.
40091-01234 ∙ 00 ∙ 10/2024
8.3
Keep the condensation trap clear
On the roof, the condensate outlets of the air
conditioning system must be kept free of obstructions,
such as dirt or leaves. If the condensate outlets are
dirty, water can enter the interior. Otherwise, the
function of the air conditioning system will be impaired
and may lead to damage.
Fig. 15
Cleaning and care
EN
31