Truma Aventa compact Gebrauchsanweisung Seite 29

Aventa compact 2.G / Aventa compact plus 2.G
7.3.5 Night mode
In night mode, the inside and outside fans run at a low
speed and are therefore very quiet.
Night mode deactivates the selected fan level setting
(low, medium, high) and activates cooling or heating
mode.
Press the button.

The display shows the symbols
Night mode is set.
Press the button again to switch off night mode. The
air conditioning system is then operated again with the
previous settings.
7.3.6 Dehumidify
Dehumidifying mode reduces the humidity in the room.
The selected fan level setting (low, medium, high) is
deactivated and cooling mode is activated.
Press the button once or several times until the

symbols and
The air conditioning system dehumidifies the room.
Dehumidification is ended by pressing the
The air conditioning system is operated with the
previous settings.
7.4 Setting the fan
The fan for the indoor air has three operating levels.
Symbol Operating level
Automatic fan control
(none)
low
medium
high
Press the or

to select the desired operating level. The
reduces the fan speed and the
it.
The desired operating level of the fan is shown on the
display. The desired operating level is set.
 In cooling / heating mode, not only the fan speed is
adjusted, but also the compressor speed.
 In "Automatic fan control" mode, the fan speed
is automatically controlled by the air conditioning
system depending on the temperature difference to
the room air.
40091-01234 ∙ 00 ∙ 10/2024
and .
appear on the display.
button once or several times
button increases
7.5 Setting the room temperature
The room temperature can be set in a range from 16 °C
to 30 °C in increments of one degree.
Set the room temperature with the

temperature selection buttons.
The desired room temperature is shown on the display.
The desired room temperature is set.
7.6 Switching on and dimming ambient
lighting (Premium air distributor
only)
Ambient lighting can be switched on and off and
dimmed using the remote control:
To switch on, press the "Ambient lighting on" button

(Fig. 9-8) once.
To dim up, press and hold the "Ambient lighting on"

button (Fig. 9-8) until the desired dimming level is
reached, then release.
To dim down, press and hold the "Ambient lighting

off" button (Fig. 9-7) until the desired dimming level
is reached, then release.
To switch off, press the "Ambient lighting off" button

button.
(Fig. 9-7) once.
The dimming level is saved when the light is switched
off.
7.7 Setting the time
The time on the remote control is set automatically
when the Truma App is connected to the Aventa.
7.8 Setting the timer
The timer is programmed via the Truma App.
button
Operation
and
EN 29