Truma Aventa compact Gebrauchsanweisung Seite 28

Operation
7.2.3 Switching on the air conditioning system
(air distributor)
Press the button on the air distributor (Fig. 5-1)

for one second.
The LED on the button lights up for 30 seconds and
then goes out.
The air conditioning system is switched on.
The air conditioning system starts with the following
settings: Automatic mode, temperature: 22 °C.
7.2.4 Switching off the air conditioning system
(air distributor)
Press the button on the air distributor (Fig. 5-1)

for one second
The LED on the button goes out.
The air conditioning system is switched off.
7.2.5 Automatic restart after an interruption to
the power supply
If the air conditioning system is disconnected from the
power supply without being switched off manually,
it switches on again automatically the next time it is
connected to the power supply.
Even after a device-related switch-off due to an
unstable power supply, the device restarts automatically
as soon as a stable power supply is restored.
7.3 Operating modes
Operation using the Bluetooth remote control is
described below. Operation with the Truma iNet X
Panel or the Truma App is described in the respective
operating instructions.
The air conditioning system has the following operating
modes:
Symbol Operating mode
Cooling mode
Heating mode
Automatic mode
Air circulation mode
Dehumidify
Night mode
7.3.1 Cooling mode
In cooling mode, the room air is dehumidified and
cooled.
Press the button once or several times until the

symbol appears on the display.
The activity indicator (Fig. 10-8) changes to blue while
the air conditioning system is in cooling mode.
28 EN
Aventa compact 2.G / Aventa compact plus 2.G
The activity indicator changes to white when the set
room temperature is reached.
The circulated air fan continues to run in order to
provide ventilation.
Cooling mode can be activated with a slight time

delay once cooling mode has been activated.
The air is dehumidified during cooling. If the air
humidity in the vehicle is extremely high at the
beginning of the cooling procedure, moisture can build
up on the underside of the air distributor. In this case:
Keep doors and windows closed

Select the highest power level

7.3.2 Heating mode
In heating mode, the air conditioning system is
operated as a heat pump and heats the interior.
Press the button once or several times until the

symbol appears on the display.
The activity indicator (Fig. 10-8) changes to red while
the air conditioning system is in heating mode.
The activity indicator changes to white when the set
room temperature is reached.
The circulated air fan continues to run in order to
provide ventilation.
 Heating mode can be activated with a slight time
delay after heating mode has been activated.
7.3.3 Automatic mode
In automatic mode, the air conditioning system is
operated in cooling or heating mode depending on
the room temperature in order to achieve the set room
temperature.
Press the button once or several times until the

symbol appears on the display.
Alternatively, press the

selection.
The activity indicator (Fig. 10-8 changes to red while
•
the air conditioning system is in heating mode.
The activity indicator changes to blue while the air
•
conditioning system is in cooling mode.
The activity indicator changes to white when the set
•
room temperature is reached.
 In automatic mode, the cooling/fan levels are
automatically adjusted so that the vehicle is initially
cooled down quickly and then, as the target
temperature is approached, is reduced to such an
extent that the air conditioning system operates as
quietly as possible.
 Automatic mode can be activated with a slight time
delay once cooling mode has been activated.
7.3.4 Air circulation mode
In circulation mode, the interior air is circulated.
Press the button once or several times until the

symbol appears on the display.
button for direct
40091-01234 ∙ 00 ∙ 10/2024