Parkside Performance PBSPA 12 E4 Bedienungsanleitung Und Originalbetriebsanleitung Seite 18

m ATTENTION! This charger
is only designed for
charging the battery pack
types:
battery pack
PAP 12 A3 2.0 Ah 3 cells
PAP 12 B3 4.0 Ah 6 cells
PAP 12 1 2.5 Ah 3 cells
PAP 12 D1 5.0 Ah 6 cells
Suitable battery packs
and chargers
Battery
pack:
Charger:
Customers can obtain
compatible replacement
batteries and chargers via
www.optimex-shop.com.
˜ Before rst use
˜ Accessories
To operate this product safely and
correctly, the following accessories, i.e.
tools and accessory tools, are necessary:
Cooling lubricant (cutting oil) suitable
o
for drilling in metal
Suitable personal protective
o
equipment
Accessories and accessory tools are
available through your authorised dealer.
When buying always consider the
technical requirements of this product
(see "Technical data").
16 GB
12 V
12 Team
12 Team
f you are not certain ask a uali ed
specialist and get advice from your
trusted dealer.
NOTE
This instruction manual contains
u
information and suggestions for
several accessory tools and their
uses. Some of the described
accessory tools are not included
in the shipment (see "Scope of
delivery"), but are meant to indicate
additional possibilities for using this
product.
WARNING!
m
Do not use accessories not
u
recommended by Parkside. This
may result in electric shock or re.
˜ Removing/attaching the
battery pack
CAUTION! Risk of injury!
m
Al ays lock the on/off s itch
u
avoid accidental starting by moving
the rotation direction switch
the centre position (Lock) before
removing/attaching the battery
pack .
[ ]
( ig. B)
Removing the battery pack
1. Press the release button
battery pack
[
2. Pull the battery pack
the grip handle
Attaching the battery pack
1. Push the battery pack
handle .
7 ] [
2. nsure the battery pack
noticeably in place.
to
[ 8 ]
into
[ 6 ]
on the
[ ]
.
]
away from
[ ]
.
7 ] [
into the grip
[ ]
clicks
[ ]