Parkside Performance PBSPA 12 E4 Bedienungsanleitung Und Originalbetriebsanleitung Seite 15

4) Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
5) Maintain power tools and
accessories. Check for
misalignment or binding of
moving parts, breakage of parts
and any other condition that may
a ect the power tool s operation.
If damaged, have the power
tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
6) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
7) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working
conditions and the work to be
performed. Use of the power tool
for operations different from those
intended could result in a hazardous
situation.
8) Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles
and grasping surfaces do not allow
for safe handling and control of the
tool in unexpected situations.
Battery tool use and care
1) Recharge only with the charger
speci ed by the manufacturer. A
charger that is suitable for one type
of battery pack may create a risk of
re hen used ith another battery
pack.
2) Use power tools only with
speci cally designated battery
packs. Use of any other battery
packs may create a risk of injury and
re.
3) When battery pack is not in use,
keep it away from other metal ob-
jects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connec-
tion from one terminal to anoth-
er. Shorting the battery terminals
together may cause burns or a re.
4) Under abusive conditions,
li uid may be ejected from the
battery; avoid contact. If contact
accidentally occurs
water. If li uid contacts eyes
additionally seek medical
help. Liquid ejected from the battery
may cause irritation or burns.
5) Do not use a battery pack
or tool that is damaged or
modi ed. Damaged or modi ed
batteries exhibit unpredictable
behaviour resulting in re explosion
or risk of injury.
6) Do not expose a battery pack or
tool to re or e cessive tempera-
ture. xposure to re or temperature
above 130 C may cause explosion.
7) Follow all charging instruction
and do not charge the battery
pack or tool outside the
temperature range speci ed in the
instruction. Charging improperly or
at temperatures outside the speci ed
range may damage the battery and
increase the risk of the re.
Service
1) Have your power tool serviced by
a uali ed repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
ush with
GB 13