Parkside Performance PBSPA 12 E4 Bedienungsanleitung Und Originalbetriebsanleitung Seite 23

Regular and proper cleaning will help
o
ensure safe use and prolong the life
of the product.
Clean the product with a dry cloth.
o
Use a soft brush for areas that are
hard to reach.
In particular clean the air vents after
o
every use with a cloth and soft brush.
The vents must always be clear.
o
˜ Maintenance
Before and after each use, check
o
the product and accessories (e.g.
accessory tools) for wear and
damage. If required, exchange
them for new ones as described in
this instruction manual. Observe
the technical requirements (see
"Technical data").
˜ Repair
This product does not contain any
o
parts that can be repaired by the user.
Contact an authorised service centre
or a similarly uali ed person to have
it checked and repaired.
˜ Storage
Push the rotation direction switch
o
to the centre position to lock the on/
off s itch .
8 ] [
Clean the product as described
o
above.
Store the product and its accessories
o
in a dark, dry, frost-free, well-
ventilated place.
Always store the product in a place
o
that is inaccessible to children. The
ideal long term storage (longer than
3 months) temperature is between
20 and 26
Store the product in its carrying
o
bag .
[ ]
[ 6 ]
.
Battery pack advice
Only store the battery pack
o
partially charged. The battery pack
should be charged to 40 to 60 %
(red and orange charging level
LEDs light up) before storing for
[ 9 ]
extended periods.
Check the battery pack
o
about every 3 months when storing
for extended periods. Recharge
as necessary.
˜ Transportation
Push the rotation direction switch
o
to the centre position to lock the on/
off s itch .
[ 8 ]
Transport the product in its carrying
o
bag .
[ ]
Protect the product from any heavy
o
impact or strong vibrations which
may occur during transportation
in vehicles.
Secure the product to prevent it from
o
slipping or falling over.
˜ Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Observe the marking of the
packaging materials for waste
separation, which are marked
with abbreviations (a) and
numbers (b) with following
meaning: 1–7: plastics/20–22:
paper and breboard/80–98:
composite materials.
Product:
Contact your local refuse
disposal authority for more
details of how to dispose of your
worn-out product.
[ ]
charge
[ ]
6 ] [
GB 21