GRANULDISK GRANULE SMART Servicehandbuch Seite 25

4 Programmieren
4.1 Voreingestellte Werte in Servicemenü
Werkseinstellungen im Servicemodus, Programmversion 5.x:
#
1 Eco wash time
2 Short wash time
3 Normal wash time
4 Separation time
5 Time control of Potwash Eco
6 Time control the rinse pump Potwash Other
7 Eco Rinse time
8 Other Rinse time
9 Steam reduction equipment
10 Steam reduction time Eco-program
11 Steam reduction time Other-program
12 Wash tank temperature
13 Rinse tank temperature
14 Temperature block in the wash tank
15 Temperature block in the rinse tank
16 Type of rinse aid dosage
17 Sensitivity on level sensor
18 Pressure reduction (Prescavenging) at program start
19 Impulse time on the pump during pressure reduction
20 Alarm Low water level
21 Alarm Wash temperature not reached
22 Alarm Rinse temperature not reached
23 Alarm Long fill time in the wash tank
24 Alarm Long fill time in the rinse tank
25 Change water after
Rev. 2014-12
Smart Unit
60 s
120 s
240 s
30 s
YES
NO
20 s
30 s
No
0 s
70 s
65 °C
85 °C
YES
YES
Per
cycle
500
No
200 ms
20 s
50 min.
15 min.
35 min.
5 min.
30 Cycles
25