Possible Cause - Pkm In4-Da-2Fza++A Bedienungsanleitung

P
OSSIBLE CAUSE
T
HE APPLIANCE MAKES HUMMING NOISE WHEN USED ON A HIGH HEAT
 Caused by induction-cooking.
N
OISE CAUSED BY THE FAN INSIDE THE APPLIANCE
 The cooling-fan the appliance is
equipped with
electronics from being overheated. It
may continue to run even after you
have switched the appliance off.
C
OOKWARE DOES NOT BECOME HOT AND THE RELEVANT SYMBOL IS
 Cookware cannot be detected,
because it is unsuitable, too small or
improperly
cooking zone.
T
HE APPLIANCE OR A COOKING ZONE HAS BEEN SWITCHED OFF
AUTOMATICALLY AND UNEXPECTEDLY
ERROR CODE IS DISPLAYED
 Technical malfunction.
If the appliance has a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
Depending on model.
46
Depending on model.
47
M
ALFUNCTION
( )
S
protects
DISPLAYED
positioned on
(
46
TYPICALLY ALTERNATING WITH ONE OR TWO
DIGITS ON THE TIMER
.
SETTING
 Normal operating condition, but the
noise should decrease or disappear
after decreasing the heat setting.
 Normal operating condition. Do not
the disconnect the appliance from the
mains while the fan is running.
.
 Use suitable cookware which meets
the diameter of the cooking zone.
the Place cookware on the centre of the
cooking zone.
,
AN ACOUSTIC SIGNAL SOUNDS AND AN
-
DISPLAY
 Note the complete error-code
disconnect the appliance from the
mains and contact the aftersales
service.
M ( )
EASURE S
.
).
,
47
~ ~
145