Pkm IN4-DA-2FZA++A Bedienungsanleitung Seite 116

Each cooking zone has 9 power levels (power levels 1 - 8 + power level « b » =
boost level / setting « 0 » = cooking zone does not heat). See also chapter 7.2
P
OWER LEVELS OF THE INDUCTION HOB
You can set the power levels of the cooking zones individually.
Always set the appliance according to your respective cooking requirements.
1. Touch the « O
stand - by mode.
2. Place a cookware on the desired cooking zone.
Always keep the bottom of the cookware as well as
the cooking zone clean and dry.
3. If no setting is carried out within 60 seconds, the appliance switches off
automatically.
4. Select a cooking zone using the sensors for the
selection of the cooking zones: e.g., the rear left
cooking zone.
Power level « 5 » is the default setting.
5. The indicator of the power level of the selected cooking zone flashes for 5
seconds. Within these 5 seconds, you can set the power level individually using
the sliding sensor.
6. Set the desired power level (1 - 8 or the boost
level « b ») of the selected cooking zone using the
sliding sensor. You can adjust the power level in
two different ways:
a) Set the power level of the selected cooking zone
using the sliding sensor itself: slide over the
sliding sensor using your fingertip.
b) Set the power level of the selected cooking zone
by touching the sliding sensor at any point.
Depending on model.
33
Depending on model.
34
H
OW TO START A COOKING PROCESS
/ O » - . The appliance is in
N FF SENSOR
You need to start at step 1 again.
33
.
34
~ ~
116