Pkm IN4-DA-2FZA++A Bedienungsanleitung Seite 122

A
UTOMATIC SWITCH
1. The hob must be switched on. If the appliance is switched
off, touch the « O
2. Now the appliance is in
3. If no setting is carried out within 60 seconds, the appliance switches off
automatically. You need to start at step 1 again.
4. Place a proper cookware on the desired cooking zone.
Always keep the bottom of the cookware as well as the
cooking zone clean and dry.
5. Select a cooking zone using the sensors for the selection of
the cooking zones: e.g., the rear left cooking zone. Power
level « 5 » is the default setting.
6. Set the desired power level (1 - b) of the cooking zone using
the
SLIDING SENSOR
7. Touch the « T
IMER
8. The indicator of the timer flashes. A red dot
indicator of the power level goes on to indicate that the timer
has been activated for this cooking zone.
9. Set the desired cooking time (01 - 99 minutes) using the
sliding sensor by swiping your fingertip over the sliding
sensor or by touching the sliding sensor at any point. The
setting time for each digit is 3 seconds.
a. If both digits of the timer indicator flash and you swipe
your fingertip over the sliding sensor, the countdown
time is increased or decreased by 10 minutes.
b. If a digit on the timer indicator flashes and you swipe your
fingertip over the sliding sensor, the countdown time is
increased or decreased by 1 minute.
10. The indicator of the timer displays the set cooking time (e.g.,
6 minutes)
Depending on model.
37
H
OW TO SET THE TIMER
-
OFF FUNCTION OF ONE COOKING ZONE
/ O » -
N FF SENSORS
-
STAND BY MODE
.
» - once.
SENSOR
:
to switch it on.
.
next to the
37
~ ~
122