How To Stop Cooking - Pkm In4-Da-2Fza++A Bedienungsanleitung

H
1. Touch the « B
RIDGE
2. The bridge cooking zone C (s. fig. above) is now deactivated, i.e., both cooking
zones A and B now work as separate cooking zones again.
3. The power levels of both cooking zones A and B can now be adjusted individually
again.

4.5 How to stop cooking

 You can switch off the cooking zone in two ways (s. below).
Always switch off the entire appliance using the « O
touch and hold the « O
appliance completely.
WARNING! Never touch a cooking zone until the residual heat
indicator has switched off (see also chapter 4.5.1 R
). RISK OF BURNS!
INDICATION
H
OW TO SWITCH OFF A COOKING ZONE GENERALLY
1. Select the cooking zone you want to switch off using the
sensors for the
COOKING ZONE
2. Set the power level of the relevant cooking zone to « »
using the sliding sensor.
3. After a few seconds, the relevant cooking zone is deactivated.
4. Always switch off the entire appliance using the
« O / O » -
N FF SENSOR
« O / O » -
N FF SENSOR
appliance completely. The acoustic signal is activated and all
indicators/LEDs are switched off (except for the residual
heat indicators / s. chapter 4.5.1 R
.
INDICATION
OW TO DEACTIVATE THE BRIDGE FUNCTION
» - (« ») once again to deactivate the bridge function.
SENSOR
/ O » -
N FF SENSOR
SELECTION OF THE COOKING ZONES
A / rear left).
. Touch
for approx. 3 seconds to switch off the
/ O
N
for approx. 3 seconds to switch off the
. (e.g.
and hold
ESIDUAL HEAT
» - . You must
FF SENSOR
ESIDUAL HEAT
:
the
~
119
~