Connection: Induction Hob ↔ Extraction Unit; Connection Diagrams - Pkm In4-Da-2Fza++A Bedienungsanleitung

contact the local building authorities and consult the relevant legal provisions.
 The electricity supply must be performed via a 16A automatic cut-out.
 If in doubt, always contact the local building authorities and consult the relevant
legal provisions.
 Do not bend or compress the power cord.
 Check the power cord regularly. The power cord must be replaced by a qualified
professional only!
2.5.1 Connection: induction hob ↔ extraction unit
WARNING! Read the information on the rating label(s) and the
connection diagram(s) before connecting the appliance to the mains.
NOTICE! Any damage caused by improper connection of your appliance
to the mains will not be fixed free of charge, even if the guarantee period
of the appliance is still valid.
You must open the cover to gain access to the terminals.
The rating plate with the technical data is usually on the underside of the
induction hob.
 The ground wire must be connected to the marked clamp of the terminal. The
green/yellow cable must be connected to the earthing cable and the terminals of
the appliance.
 The connection wire must be secured in a strain-relief clamp.
 When the appliance is connected, switch on all cooking zones for approx. 3
minutes. Convince yourself of the proper operation of the induction hob.
C
ONNECTION DIAGRAMS
~ ~
106