Touch this sensor to activate / deactivate the extractor fan.
NOTICE! You can switch off the extractor fan at any set power level.
Use this sensor to decrease or increase the power level (motor speed) of the
extractor fan.
1. Set the desired power level (1 - 8 or the boost
level « b ») of the extractor fan using the sliding
sensor. The power indicator of the extractor hood
must flash (approx. 5 seconds). You can adjust the
power level in two different ways:
a) Set the power level of the selected cooking zone
using the sliding sensor itself: slide over the
sliding sensor using your fingertip.
b) Set the power level of the selected cooking zone
by touching the sliding sensor at any point.
This power level is suitable for slow cooking / simmering and roasting with the
lid of the cookware closed.
Use these power levels when low steam generation occurs (low concentration of
cooking fumes).
Use these power levels for an ideal air circulation in the kitchen when medium
steam generation occurs (medium concentration of cooking fumes).
Depending on model.
40
E
XTRACTOR FAN
S
ETTING OF THE POWER LEVEL
L
OW POWER LEVELS
M
EDIUM POWER LEVELS
«
/
»
ON
OFF
:
SLIDING SENSOR
40
~
~
131