Pkm IN4-DA-2FZA++A Bedienungsanleitung Seite 123

11. When you have finished the setting, the countdown of the
set time starts. When the set countdown time (cooking time)
has elapsed, an acoustic signal sounds 6 times and the
corresponding cooking zone is switched off automatically.
12. Beware of the hot surfaces of the cooking zones! An « H »
indicates which cooking zones are still hot.
13. Repeat steps 5. - 9. to set the timer for another cooking zone.
If you want to change the set countdown time (cooking time) after programming,
you need to start at step 5. again.
If you want to cancel the countdown time, touch and hold the « T
for a few seconds.
If the remaining countdown time is less than 1 minute, the display indicates the
elapsing seconds.
WARNING! If the timer is set for one cooking zone only, the other
activated cooking zones remain in operation after the set time has
elapsed.
AUTOMATIC SWITCH
If you operate more than one cooking zone automatically, the last set time value
is displayed. For example: if you have set cooking zone A (e.g., power level 5) to
6 minutes and then cooking zone B (e.g., power level 6) to 3 minutes, the
smallest time value
indicator indicates that this cooking zone is selected.
Depending on model.
38
H
OW TO SET THE TIMER
-
OFF FUNCTION OF MORE THAN ONE COOKING ZONE
03 is displayed. The red dot
« »
C
OOKING ZONE
(
POWER LEVEL
 Set to 6 minutes.
C
OOKING ZONE
(
POWER LEVEL
 Set to 3 minutes.
:
beneath the power level
38
A
5)
B
6)
» -
IMER SENSOR
~ ~
123