Activation Of The Bridge Function (Bridge Cooking Zone) - Pkm In4-Da-2Fza++A Bedienungsanleitung

7. The selected power level is displayed next to the
cooking zone indicator: e.g., « 6 ».
8. You can vary the power level at any time during cooking.
9. A
FTER THE COOKING PROCESS IS FINISHED
completely using the « O
).
COOKING
T
HE DISPLAY INDICATES THE SYMBOL
a) you have not placed the cookware on the correct zone
b) you use unsuitable cookware
c) you use unsuitable cookware
d) you use cookware which is too small or not centred on the cooking zone
properly.
While using unsuitable cookware, the cooking zone does not heat up.

4.4.1 Activation of the bridge function (bridge cooking zone)

 The cooking zones A and B (s. fig. below) are equipped with a bridge function.
 This function enables the control of the two cooking zones (A and B)
simultaneously, i.e. you can set a temperature and the timer (if desired) for both
cooking zones at the same time.
When you activate the bridge function of the two cooking zones (cooking zone
A + cooking zone B = bridge zone), the cookware must have a minimum
diameter of 200 mm for an optimum cooking result.
Depending on model.
35
/ O » -
N FF SENSORS
POWER LEVEL ALTERNATELY
OR
OR
OR
: always switch off the appliance
(see also chapter 4.5 H
AND THE INDICATOR OF THE
:
35
OW TO STOP
~ ~
117