Electrical Connection; Instructions For The Installer - Pkm In4-Da-2Fza++A Bedienungsanleitung

2.5 Electrical connection

DANGER! The appliance must be connected to the mains by a
qualified professional, who is familiar with and adheres to the local
requirements and supplementary regulations of your electricity supplier.
DANGER!
All electrical work must be carried out by a qualified
professional. Do not modify the energy supply. The connection must be
carried out in accordance with the current local and legal regulations.
DANGER!
Do not carry out the installation yourself. RISK OF
ELECTRIC SHOCK!
NOTICE! Any damage caused by improper connection of your appliance
to the mains will not be fixed free of charge, even if the guarantee period
of the appliance is still valid.
I
NSTRUCTIONS FOR THE INSTALLER
 Your household power supply must meet the power consumption of the
appliance.
 The voltage must meet the values on the nameplate.
 The power cord must withstand the values on the nameplate.
 When connecting do not use adapters, reducers and branching devices as they
cause overheating. RISK OF FIRE!
 The power cord must not touch hot areas and its temperature must not exceed
75 °C.
 Remember that the connection wire should match the connection type and the
power rating of the cooker.
 The connection wire must be secured in a strain-relief clamp.
 The ground wire must be connected to the marked clamp of the terminal.
 The electric supply of the appliance must be equipped with an emergency switch
with a distance between the contacts of at least 3 mm which disconnects the entire
appliance from the mains in a case of emergency.
 Read the information on the rating label(s) and the connection diagram(s)
before connecting the appliance to the mains.
 When the socket is not accessible for the user or a fixed electrical connection
of the appliance is required, an all-pole disconnecting device must be
incorporated during installation. Disconnecting devices are switches with a
contact opening distance of at least 3 mm. These include LS-switches, fuses and
protectors (EN 60335). Read the information on the nameplate and the
connection diagram before connecting the appliance to the mains. The electricity
supply must be performed via a 16A automatic cut-out. If in doubt, always
(
QUALIFIED PROFESSIONAL
):
~ ~
105