Before Initial Use; Use Of The Touch Control / Sensor Buttons - Pkm In4-Da-2Fza++A Bedienungsanleitung

 The induction hob is equipped with an automatic cookware detection.
 If there is no cookware on a cooking zone, the indicator of the cooking zone
displayed « ».
 If the cookware is placed on the cooking zone within 10 minutes, it will be
detected by the cooking zone and the cooking zone switch on according to the
set power level.
 When the cookware is removed from the cooking zone, the energy supply is
interrupted.

4.1 Before initial use

 Remove the complete protective film!
 Clean the glass-ceramic (look at chap. C
NOTICE! Ensure that the complete packaging material has been removed
before initial operation.

4.2 Use of the touch control / sensor buttons

 The sensor buttons respond to touches, so you do not need to press them.
 Touch the sensors with the bottom side of your top phalanx but not with your
fingertip (see fig. below).
 You will hear a beep after each effective input.
 Always keep the touch control clean and dry. Cooking utensils and cloths should
not cover the touch control. A thin water film may already complicate operating
the sensors.
A
UTOMATIC DETECTION OF THE COOKWARE
LEANING AND MAINTENANCE
).
~ ~
113