Bridge Function - Pkm In4-Da-2Fza++A Bedienungsanleitung

A
B
C
1. Activate a cooking zone (A or B) on the desired side (left or right) of the induction
hob.
2. Touch the « B
RIDGE
activate the bridge cooking zone C (cooking zones A + B).
3. The indicator of the bridge function goes on. The bridge cooking zone C (s. fig.
above) is now activated, i.e. the two cooking zones A and B work as a large
cooking zone.
4. The indicators of the power levels display the current power level of the bridge
cooking zone C.
5. After you have activated the bridge function: if no cookware is detected within
10 minutes, the bridge cooking zone will be deactivated automatically.
If both cooking zones (A and B) are working and you then activate the bridge
function, the power level of the respective bridge cooking zone C is adjusted to
the cooking zone with the lower power level (e.g. cooking zone A = power level
« 3 » and cooking zone B = power level « 5 »: bridge cooking zone C = power level
« 3 »).
You can vary the power level at any time during cooking.
The T can also be used when the bridge cooking zone C is activated (s. also
IMER
chapter 4.7 H
OW TO USE THE TIMER
(bridge cooking zone = cooking zones A + B)
H
OW TO ACTIVATE THE BRIDGE FUNCTION
» - (« ») of the selected hob side (left or right) once to
SENSOR
C A
OOKING ZONE
C B
OOKING ZONE
B
RIDGE FUNCTION
)
~ ~
118