Pkm IN4-DA-2FZA++A Bedienungsanleitung Seite 101

I
NSTALLATION OF THE INDUCTION HOB AND THE EXTRACTOR FAN
1. Before installing the induction hob, you may need to fix the adhesive seal
on the bottom edge of the induction hob properly (s. fig. below).
The seal must be fitted tightly on the bottom edge of the induction hob (no
overlaps, no gaps etc.) to prevent liquids etc. from entering the installation
opening subsequently.
J
2. Install the water container (B) and the curved connecting piece (G) properly (see
fig. below). Attach the curved connecting piece (G) to the housing of the
induction hob by gluing.
Depending on model.
30
( :
EXAMPLE RECIRCULATION MODE
S -
ELF ADHESIVE SEAL
)
/
FOAM STRIP
/
(J)
30
~ ~
101